Servo Motor Supplier in Delhi NCR: Buying Guide

Key Takeaways

NCR packaging machines, printing and converting lines, press feeders and assembly automation all use servo motors.
We supply Rtelligent RSHA, RSNA, RSDA and RSM AC servo motors (roughly 50 W to 1 kW), integrated, DC servo motors and reducers.
Size the motor from the motion profile: RMS and peak torque, top speed and the load-to-motor inertia ratio.
Motor, drive, cables and gearbox are supplied as one matched set from Ahmedabad.

Printing presses that hold register at speed, converting lines at Noida and Faridabad, servo press feeders in the Gurugram and Manesar component belt and the packaging machines built in Okhla all rely on servo motors. Where a stepper runs out of speed or cannot cope with changing loads, a servo takes over. RB Automation is a servo motor supplier in Delhi NCR, supplying the Rtelligent servo range with matched drives and gearboxes from Ahmedabad.

Which Servo Option for Which NCR Axis

NCR axis	Suggested option	Reason
Film feed and sealing jaws on an Okhla flow wrapper	Rtelligent AC servo motor	High speed with torque that holds up
Draw roller on a Noida or Faridabad converting line	Rtelligent AC servo motor	Smooth, steady speed in sync with the line
Coil feed rolls on a Manesar press line	AC servo motor with servo reducer	Fast start-stop with a heavy roll inertia
Handling unit inside a compact electronics machine	Integrated low-voltage servo motor	Drive built into the motor, low-voltage supply
Mechanism with very little space behind the flange	Super short DC servo motor	Short motor body

Signs an Axis Has Outgrown a Stepper

The machine needs to run faster, and the stepper stalls near top speed.
Load changes from cycle to cycle, so the motor is either oversized or slipping.
Moves must start and stop very quickly, which calls for short bursts of overload torque.
Several axes have to stay synchronised while the line speed changes.

A Typical Servo Application in Delhi NCR

Picture a typical coil feeder in front of a press on an auto component line in IMT Manesar. Each stroke, the feeder must push a set length of strip into the die in the short window while the press ram is up, then hold still. A servo motor with a servo reducer on the feed rolls handles the fast acceleration and stop, and the drive keeps the length consistent as coil weight changes. The press PLC sends a start signal each stroke, and the feed length becomes a recipe value on the HMI instead of a mechanical adjustment.

Servo Motor Mistakes to Avoid

Sizing on continuous torque and ignoring the acceleration peak.
Driving a large load inertia directly without a reducer.
No holding brake on a vertical or gravity-loaded axis.
Encoder cables run without shielding or proper earthing.
Combining a motor and drive from series that are not matched.

What to Send for a Servo Motor Quote

Motion profile: stroke, time and acceleration
Load mass or inertia and any gearbox
Top speed and duty cycle
Brake and encoder needs
Controller type, quantity and NCR delivery location

Why a Servo Motor Behaves Differently

A servo motor never runs on its own: its encoder reports position continuously to the servo drive, which adjusts current thousands of times a second to keep the shaft on the commanded path. That closed loop gives high speed with torque that holds up, smooth motion, short bursts of overload for fast acceleration, and accurate stopping even when the load changes from one cycle to the next.

Servo Motors We Supply to Delhi NCR

RSHA series AC servo motors
RSNA series AC servo motors
RSDA series AC servo motors
RSM series servo motors
Integrated low-voltage servo motors with the drive built into the motor body.
Super short DC servo motors for cramped mechanisms.
Servo reducers, planetary gearboxes that raise torque and help match load inertia.

The Rtelligent AC servo motors run from roughly 50 W to 1 kW, the band most packaging, printing and light automation axes fall into. More detail is on the AC servo motor and servo system pages, and our article AC servo motor vs DC servo motor compares the two motor types.

Servo Motor Applications in Delhi NCR

Packaging machines in Okhla, Mayapuri and Wazirpur

Flow wrappers, form-fill-seal machines, cartoners and labellers use servo axes for film feed, sealing jaws and product infeed, where speed and register must stay locked together.

Printing and converting lines in Noida and Faridabad

Draw rollers, register correction and rewinding axes need smooth speed control and tight synchronisation across the line.

Press feeders and assembly in Gurugram, Manesar and Faridabad

Coil feeders on press lines and pick-and-place, pressing and screwing stations on auto component assembly lines use servo motors for fast, accurate moves.

Working Out the Right Motor Size

Sizing begins with the cycle itself. Sketch how far the axis travels, how long it has, how quickly it must speed up and slow down and how long it rests. From that you get two torque figures: the peak needed while accelerating, which the motor can supply for a short time, and the average, or RMS, torque over the whole cycle, which decides whether the motor runs cool. Friction and any weight being lifted add to both.

Then compare the load's inertia with the motor's. When the load is many times heavier in inertia than the rotor, the axis becomes hard to tune; a planetary reducer shrinks that ratio and multiplies torque at the same time, at the cost of top speed. Add a holding brake if gravity can pull the axis down, and always choose the drive as a matched partner, covered in our servo drive guide for Delhi NCR.

If the axis is slower and shorter, a closed-loop stepper may be enough. Our stepper servo drive guide for Delhi NCR and the article stepper motor vs servo motor help you decide.

Why NCR Machine Builders Choose RB Automation for Servo Motors

As Rtelligent's technical partner, we supply the servo motor, the matched drive, the cables and the reducer as one package. Sizing questions are handled by phone, WhatsApp and email, and orders ship from Ahmedabad by courier or road transport. See the full range we supply to Delhi NCR.

Conclusion

A servo motor sized from the real motion profile gives an NCR packaging, printing or press-feed machine speed and accuracy without overheating or over-spending. Share your profile with RB Automation and we will recommend a matched Rtelligent motor, drive and gearbox.

Looking for a quote in Delhi NCR? Contact RB Automation at +91 8511104864, WhatsApp +91 9898739737 or email contact@rbautomate.com. We call back Monday to Saturday, 10:00 am to 6:00 pm.

More Buying Guides for Delhi NCR

Frequently Asked Questions

Which servo motors do you supply to Delhi NCR?

We supply Rtelligent RSHA, RSNA, RSDA and RSM series AC servo motors, integrated low-voltage servo motors, super short DC servo motors and servo reducers.

What power range do the Rtelligent AC servo motors cover?

Roughly 50 W to 1 kW, which suits most packaging, printing and light automation axes.

Do I need a servo motor or a stepper for a press feeder or flow wrapper?

Fast, continuous or synchronised axes such as press feeds, film feeds and sealing jaws usually need a servo. Slower indexing moves may run on a closed-loop stepper. Share the motion profile and we will advise.

Do you supply the servo drive and gearbox with the motor?

Yes. We supply matched Rtelligent servo drives, cables and servo reducers so the axis comes as one package.

What is the price of a servo motor in Delhi NCR?

The price depends on the series, power, encoder, brake option, matching drive and quantity, so RB Automation quotes each requirement. Use the form on this page, call +91 8511104864 or email contact@rbautomate.com.

Summarize with AI:

ChatGPT Claude Google AI Perplexity